生物降解塑料PBSLA/层状硅酸盐复合材料的制备及性能研究

宋平, 田卫花, 尚敬诏, 魏志勇

PDF(1955 KB)
PDF(1955 KB)
塑料科技 ›› 2024, Vol. 52 ›› Issue (07) : 109-114. DOI: 10.15925/j.cnki.issn1005-3360.2024.07.024
生物与降解材料

生物降解塑料PBSLA/层状硅酸盐复合材料的制备及性能研究

作者信息 +

Preparation and Properties of Biodegradable Copolyester Poly(butylene succinate-co-L-lactate)/Layered Silicate Composites

Author information +
History +

摘要

采用溶液共混的方法,利用有机改性蒙脱土(OMMT)和云母(Mica)层状硅酸盐无机填料对生物可降解聚(丁二酸丁二醇-共-左旋乳酸酯)(PBSLA)共聚酯进行复合改性,对PBSLA/层状硅酸盐复合材料的热学性能、结晶性能、阻隔性能和力学性能进行研究。结果表明:层状硅酸盐填料的质量分数低于4%时,其在共聚酯基体中分散性良好。无机填料充当异相成核剂的作用,在一定程度上改善了基体材料的结晶性能。力学性能方面,一定量的层状硅酸盐填料起增强作用。当OMMT和Mica的添加量分别为2%和3%时,复合材料的拉伸强度达到最大值,较PBSLA可分别提升18.4%和34.4%。层状结构有效增加了气体分子的曲折路径,随着填料含量的增加,复合材料的水蒸气和氧气透过系数均呈现下降趋势。因此,层状硅酸盐填料的加入可以提高PBSLA基体材料的阻隔性能。

Abstract

Biodegradable poly(butanediol succinate-co-L-lactate) (PBSLA) copolyesters were modified using organic modified montmorillonite (OMMT) and Mica layered silicate inorganic fillers in solution blending method. The thermal properties, crystallization properties, barrier properties and mechanical properties of PBSLA/laminosilicate composites were studied. The results show that when the mass fraction of the layered silicate filler is less than 4%, its dispersion in copolyester matrix is good. The inorganic filler acts as the heterogeneous nucleating agent, which improves the crystallization property of the matrix material to some extent. In terms of mechanical properties, a certain amount of layered silicate filler plays an enhanced role. When the addition of OMMT and Mica is 2% and 3%, respectively, the tensile strength of the composites reache the maximum value, and can be increased by 18.4% and 34.4% compared with PBSLA, respectively. The layered structure effectively increases the zigzag path of gas molecules. With the increase of filler content, the water vapor and oxygen permeability coefficients of the composite show a downward trend. Therefore, the addition of layered silicate fillers can improve the barrier properties of PBSLA matrix materials.

关键词

PBSLA共聚酯 / 层状硅酸盐填料 / 阻隔性能

Key words

PBSLA copolyester / Layered silicate filler / Barrier properties

中图分类号

TQ323.4

引用本文

导出引用
宋平 , 田卫花 , 尚敬诏 , . 生物降解塑料PBSLA/层状硅酸盐复合材料的制备及性能研究. 塑料科技. 2024, 52(07): 109-114 https://doi.org/10.15925/j.cnki.issn1005-3360.2024.07.024
SONG Ping, TIAN Wei-hua, SHANG Jing-zhao, et al. Preparation and Properties of Biodegradable Copolyester Poly(butylene succinate-co-L-lactate)/Layered Silicate Composites[J]. Plastics Science and Technology. 2024, 52(07): 109-114 https://doi.org/10.15925/j.cnki.issn1005-3360.2024.07.024

参考文献

1
FAUZIAH S H, RIZMAN-IDID M, CHEAH W, et al. Marine debris in Malaysia: A review on the pollution intensity and mitigating measures[J]. Marine Pollution Bulletin, 2021, DOI: 10.1016/j.marpolbul.2021.112258.
2
CONFENTE I, SCARPI D, RUSSO I. Marketing a new generation of bio-plastics products for a circular economy: The role of green self-identity, self-congruity, and perceived value[J]. Journal of Business Research, 2020, 112: 431-439.
3
霍鹏.可降解塑料的研究现状及发展趋势[J].工程塑料应用,2016,44(3):150-153.
4
刘佳欣,赵晓颖,翁云宣.生物基可降解聚合物食品包装材料发展及应用综述[J].包装工程,2023,44(13):19-26.
5
郑卫,赵振新,马名杰,等.可降解材料的市场现状及发展前景[J].河南化工,2023,40(1):1-5.
6
SALMAWY A EL, YAMANE H, MIYAMOTO M, et al. Properties and degradability of melt-spun fibers of poly(butylene succinate) and its copolymer with L-lactic acid[J]. Sen-I Gakkaishi, 1999, 55(3): 120-126.
7
TANIGUCHI I, NAKANO S, NAKAMURA T, et al. Mechanism of enzymatic hydrolysis of poly(butylene succinate) and poly(butylene succinate-co-L-lactate) with a lipase from Pseudomonas cepacia[J]. Macromolecular Bioscience, 2002, 2(9): 447-455.
8
TAN L C, CHEN Y W, ZHOU W H, et al. Novel poly(butylene succinate-co-lactic acid) copolyesters: Synthesis, crystallization, and enzymatic degradation[J]. Polymer Degradation and Stability, 2010, 95(9): 1920-1927.
9
TIAN W H, TU Z, LIU L P, et al. A comparative study of glycolic acid and L-lactic acid on modification of poly(butylene succinate)[J]. Polymer Degradation and Stability, 2022, DOI: 10.1016/j.polymdegradstab.2022.110194.
10
马志蕊,尹甜,蒋志魁,等.PBS及其复合膜的制备及应用研究进展[J].中国塑料,2023,37(10):24-33.
11
MA F H, WANG B, LENG X F, et al. Biodegradable PBAT/PLA/CaCO3 blowing films with enhanced mechanical and barrier properties: Investigation of size and content of CaCO3 particles[J]. Macromolecular Materials and Engineering, 2022, DOI: 10.1002/mame.202200135.
12
赵聪,司鹏翔,杨昆,等.聚多巴胺改性纳米二氧化硅对PLA/PBS共混复合材料性能的影响[J].塑料工业,2016,44(2):122-125, 140.
13
SHARMA R, JAFARI S M, SHARMA S. Antimicrobial bio-nanocomposites and their potential applications in food packaging[J]. Food Control, 2020, DOI: 10.1016/j.foodcont.2020.107086.
14
刘婷婷,张培萍,吴永功.层状硅酸盐矿物填料在聚合物中的应用及发展[J].世界地质,2001,20(4):360-363, 388.
15
唐伟家,蒋顶军,吴汾.国外无机填料新产品及其应用[J].中国非金属矿工业导刊,2007,59(1):15-17.
16
PAVLIDOU S, PAPASPYRIDES C D. A review on polymer-layered silicate nanocomposites[J]. Progress in Polymer Science, 2008, 33(12): 1119-1198.
17
HWANG S Y, YOO E S, IM S S. The synthesis of copolymers, blends and composites based on poly(butylene succinate)[J]. Polymer Journal, 2012, 44(12): 1179-1190.
18
于旻,李星佳,葛正浩,等.无机填料增强PBS可降解复合材料的力学性能研究[J].陕西科技大学学报,2019,37(2):121-126, 133.
19
CORREA J P, BACIGALUPE A, MAGGI J, et al. Biodegradable PLA/PBAT/clay nanocomposites: Morphological, rheological and thermomechanical behavior[J]. Journal of Renewable Materials, 2016, 4(4): 258-265.
20
FREITAS A L P L, TONINI FILHO L R, CALVÃO P S, et al. Effect of montmorillonite and chain extender on rheological, morphological and biodegradation behavior of PLA/PBAT blends[J]. Polymer Testing, 2017, 62: 189-195.
21
PALSIKOWSKI P A, KUCHNIER C N, PINHEIRO I F, et al. Biodegradation in soil of PLA/PBAT blends compatibilized with chain extender[J]. Journal of Polymers and the Environment, 2018, 26: 330-341.
22
ABULYAZIED D E, ENE A. An investigative study on the progress of nanoclay-reinforced polymers: Preparation, properties, and applications: A review[J]. Polymers, 2021, DOI: 10.3390/polym13244401.
23
祝杰.聚丁二酸丁二醇酯(PBS)/左旋聚乳酸(PLLA)及其共混物结晶行为研究[D].北京:北京化工大学,2013.
24
谢飞,刘明,张峰,等.一种云母粉增强蒙脱土改性PBT复合材料及其制备方法:201910066930[P].2019-05-21.
25
何秀芝.可生物降解PBS/淀粉复合材料的制备与性能研究[D].郑州:郑州大学,2013.
26
程蹈,朱诗留,柯骆,等.不同填料增强PBS复合材料的力学性能[J].工程塑料应用,2019,47(5):131-136.
27
吕学东,罗发亮,林海涛,等.聚丁二酸丁二醇酯的合成工艺及气体阻隔性最新进展[J].化工进展,2023,42(5):2546-2554.
28
RAY S S, OKAMOTO K, OKAMOTO M. Structure-property relationship in biodegradable poly(butylene succinate)/layered silicate nanocomposites[J]. Macromolecules, 2003, 36(7): 2355-2367.
29
NIELSEN L E. Models for the permeability of filled polymer systems[J]. Journal of Macromolecular Science: Part A-Chemistry, 1967, 1(5): 929-942.
30
姜红,赵阳,洪浩群,等.PBAT/PPC/改性云母复合材料的制备与性能研究[J].塑料科技,2022,50(11):19-23.

基金

辽宁省科技厅重大攻关项目(2022JH1/10400022)

评论

PDF(1955 KB)

Accesses

Citation

Detail

段落导航
相关文章

/