抗菌性聚乳酸复合膜的制备和性能研究进展

刘云春, 朱平, 张甜甜, 连俊杰

PDF(715 KB)
中国高校科技期刊信息汇聚平台
PDF(715 KB)
塑料科技 ›› 2024, Vol. 52 ›› Issue (02) : 119-123. DOI: 10.15925/j.cnki.issn1005-3360.2024.02.025
综述

抗菌性聚乳酸复合膜的制备和性能研究进展

作者信息 +

Research Progress on Preparation and Properties of Antibacterial Polylactic Acid Composite Films

Author information +
History +

摘要

聚乳酸具有抗菌性能优良、生物可降解、生物相容性好以及成本低等优点，在医学和包装领域应用广泛。在聚乳酸中添加抗菌剂是拓宽聚乳酸应用领域的一个重要方式。文章从流延成膜法、静电纺丝法和3D打印法等方面介绍了典型抗菌性聚乳酸复合膜的制备方法，从无机抗菌剂、有机抗菌剂、天然抗菌剂等方面介绍抗菌性聚乳酸复合膜的种类，总结了近年来抗菌性聚乳酸复合膜在食品包装和伤口敷料领域的发展。研究表明：不同的制备方法对聚乳酸复合膜的抗菌性能有不同的影响，3D打印法与静电纺丝法是未来抗菌性聚乳酸复合膜制备的发展方向。将聚乳酸与不同的抗菌剂复合，均具有优良的抗菌性能，可根据实际需要，灵活选择抗菌剂。

Abstract

Polylactic acid has the advantages of excellent antibacterial properties, biodegradability, good biocompatibility,and low cost, and is widely used in the fields of medicine and packaging. The addition of antimicrobial agents to polylactic acid is an important way to broaden the application field of polylactic acid. In this paper, the preparation methods of typical antibacterial polylactic acid composite films are introduced from the aspects of cast film formation, electrospinning, and 3D printing. From the aspects of inorganic antimicrobial agents, organic antimicrobial agents, and natural antibacterial agents, the types of antibacterial polylactic acid composite films are introduced. This paper summarizes the development of antibacterial polylactic acid composite film in the field of food packaging and wound dressings in recent years. The results show that different preparation methods have different effects on the antibacterial properties of polylactic acid composite films, and 3D printing and electrospinning are the development directions for the preparation of antibacterial polylactic acid composite films in the future. Polylactic acid is compounded with different antibacterial agents, all of which have excellent antibacterial properties, and antibacterial agents can be flexibly selected according to actual needs.

关键词

聚乳酸 / 无机抗菌剂 / 有机抗菌剂

Key words

Polylactic acid / Inorganic antimicrobials / Organic antimicrobial

中图分类号

TS176

引用本文

EndNote

Ris (Procite)

Bibtex

导出引用
刘云春 , 朱平 , 张甜甜 , 等. 抗菌性聚乳酸复合膜的制备和性能研究进展. 塑料科技. 2024, 52(02): 119-123 https://doi.org/10.15925/j.cnki.issn1005-3360.2024.02.025
LIU Yun-chun, ZHU Ping, ZHANG Tian-tian, et al. Research Progress on Preparation and Properties of Antibacterial Polylactic Acid Composite Films[J]. Plastics Science and Technology. 2024, 52(02): 119-123 https://doi.org/10.15925/j.cnki.issn1005-3360.2024.02.025

参考文献

列表( 原文顺序 | 文献年度倒序 | 文中引用次数倒序 ) 可视化分析
1
巢梦颖,刘雨鹭,凌新龙.纺织品抗菌材料及其应用研究进展[J].纺织科学与工程学报,2023,40(2):65-75.
本文引用 [1]
2
黄斌,刘军,范启东.3D打印改性聚乳酸性能研究进展[J].塑料科技,2021,49(8):101-104.
本文引用 [1]
3
刘文龙,晏宸然,危梦,等.不同聚乳酸膜的抗菌性比较[J].现代食品科技,2020,36(3):175-179, 28.
本文引用 [1]
4
潘倩文,李惠静,吴彦超.基于聚维酮碘改性的抗菌复合材料的研究进展[J].工程塑料应用,2020,48(6):133-136.
本文引用 [1]
5
ZANDER Z, NEWTON D, SCAGLIONE H, et al. Microbial susceptibility of various polymers and evaluation of thermoplastic elastomers with antimicrobial additives[J]. Polymer Engineering & Science, 2021, 61(12): 3029-3036.
本文引用 [1]
6
李昱杰,陈俊冬,王玥,等.聚乳酸复合膜的制备及应用进展[J].塑料工业,2022,50(6):56-63.
本文引用 [1]
7
张创,刘欣,常会奇,等.水溶性聚乙烯醇薄膜应用及生产工艺[J].塑料科技,2021,49(6):101-105.
本文引用 [1]
8
JAHAN Z, NIAZI K B M, HÄGG M, et al. Decoupling the effect of membrane thickness and CNC concentration in PVA based nanocomposite membranes for CO2/CH4 separation[J]. Separation and Purification Technology, 2018, 204: 220-225.
本文引用 [1]
9
SUN Q R, MEKONNEN T, MISRA M, et al. Novel biodegradable cast film from carbon dioxide based copolymer and poly(lactic acid)[J]. Journal of Polymer Environment, 2016, 24(1): 23-36.
本文引用 [1]
10
FATHIMA P E, PANDA S K, ASHRAF P M, et al. Polylactic acid/chitosan films for packaging of indian white prawn (fenneropenaeus indid us)[J]. International Journal of Biological Macromolecules, 2018, 117: 1002-1010.
本文引用 [1]
11
赵英杰.基于氧化铁纳米材料的电化学发光传感器的制备及应用研究[D].长春:长春师范大学,2022.
本文引用 [1]
12
王琪菲.功能化聚合物纳米纤维的制备及其性能研究[D].长春:吉林大学,2022.
本文引用 [1]
13
王丹丹.海藻酸钠的化学改性及电纺纤维膜的制备与性能研究[D].青岛:青岛大学,2021.
本文引用 [1]
14
刘莉.二氧化钛复合纳米纤维膜的制备及其对有机染料移除性能的研究[D].长春:吉林大学,2022.
本文引用 [1]
15
李慧,田家瑶,庞姗姗,等.纳米纤维素晶体增强补强聚乙烯醇薄膜性能研究现状[J].包装工程,2023,44(3):23-31.
本文引用 [1]
16
孙鑫.多孔聚乳酸膜表面微纳结构的构筑与浸润性调控[D].贵州:贵州大学,2021.
本文引用 [1]
17
岳甜甜,郑帅,刘宇清.CO2分离用中空多孔纤维膜的研究进展[J].毛纺科技,2023,51(4):102-107.
本文引用 [1]
18
徐宇辰,励建荣,李婷婷,等.抗菌肽Piscidin 1 PG/聚乳酸电纺纳米纤维膜的制备及其对海鲈鱼的保鲜作用[J].现代食品科技,2021,37(4):102-109.
本文引用 [1]
19
李建根,杨宕莎,朱妍妍,等.电纺PLA/BioMIL-5复合纤维膜的制备及其吸附过滤性能研究[J].化工新型材料,2023,51(7):259-265.
本文引用 [1]
20
严玉蓉,赵耀明,詹怀宇,等.三叶异形聚乳酸纤维的熔融纺丝及其性能研究[J].合成纤维工业,2006(5):11-13.
本文引用 [1]
21
MARKOS P, NECTARIOS V, NIKOLAOS M, et al. Multifunctional material extrusion 3D-printed antibacterial polylactic acid (PLA) with binary inclusions: The effect of cuprous oxide and cellulose nanofibers[J]. Fibers, 2022, DOI: 10.3390/fib10060052.
本文引用 [1]
22
WU C, LIAO H. Polyester-based green composites for three-dimensional printing strips: Preparation, characterization and antibacterial properties[J]. Polymer Bulletin, 2017, 74(6): 2277-2295.
本文引用 [1]
23
刘文龙,雷英杰,晏宸然,等.抗菌性聚乳酸复合膜在食品包装上的研究进展[J].包装工程,2020,41(7):113-119.
本文引用 [1]
24
王萍,王先丽,吴迪,等.生物降解Mg增强PLA复合膜用于引导骨再生的抗菌性能研究[J].南京医科大学学报:自然科学版,2022,42(7):965-972.
本文引用 [1]
25
刘欣,李先亮,宋立新,等.增容剂对掺杂无机抗菌剂的聚乳酸/热塑性淀粉复合材料的性能影响[J].塑料科技,2023,51(3):7-12.
本文引用 [1]
26
袁明伟,曹剑飞,鲁越,等.纳米ZnO-PLLA/聚乳酸复合薄膜的性能研究[J].塑料工业,2018,46(3):124-127.
本文引用 [1]
27
罗坤明,吴志林.抗菌涂层和抗菌塑料在食品包装中的研究发展[J].包装工程,2020,41(3):98-107.
本文引用 [1]
28
冯诗艺,蒋悦,祁悦,等.PLA/nano-TiO2复合膜的制备及性能研究[J].塑料工业,2019,47(7):82-87, 116.
本文引用 [1]
29
黄子翔,刘一帆,王越,等.可降解聚乳酸复合膜的制备与性能表征[J].塑料,2021,50(1):117-122.
本文引用 [1]
30
ZHU J, HOU J, ZHANG Y, et al. Polymeric antimicrobial membranes enabled by nanomaterials for water treatment[J]. Journal of Membrane Science, 2018, 550(15): 173-197.
本文引用 [1]
31
田娜,苏琼,王彦斌,等.抗菌超疏水功能复合型涂料的研究进展[J].功能材料,2023,54(1):1040-1049.
本文引用 [1]
32
王英沣,殷茂力,杨钊,等.抗菌聚己内酯/聚乳酸纳米纤维膜的制备及其性能[J].安徽工程大学学报,2021,36(6):43-50.
本文引用 [1]
33
孙浩.聚酰胺复合反渗透膜的制备及其高通量脱盐性能研究[D].哈尔滨:哈尔滨工业大学,2020.
本文引用 [1]
34
周孟娇,王双红,贾清秀,等.载银型生物基聚酰胺/聚乳酸纤维膜的抗菌性能[J].高分子材料科学与工程,2019,35(3):53-59.
本文引用 [1]
35
ZHANG J A, LIU J, WU H J, et al. The effects of antimicrobial peptides and hyaluronic acid compound mask on wound healing after ablative fractional carbon dioxide laser resurfacing[J]. Journal of Cosmetic and Laser Therapy, 2019, 21(4): 217-224.
本文引用 [1]
36
费燕娜,潘宏,李汶雨,等.聚乳酸负载透明质酸复合电纺纤维膜的制备及性能[J].上海纺织科技,2023,51(3):27-30.
本文引用 [1]
37
SEDELKIN M V, POTEKHINA N L, LEBEDEVA A O, et al. Synthesis and characterization of chitosan filtration membranes with enhanced antimicrobial properties[J]. Membranes and Membrane Technologies, 2020, 2(1): 20-26.
本文引用 [1]
38
顾晓华,李燕,刘思雯,等.聚乳酸/聚碳酸丁二醇酯/壳聚糖复合纤维膜的制备及表征[J].高分子材料科学与工程,2020,36(12):129-136.
本文引用 [1]
39
CRUZ-ROMERO M C, MURPHY T, MORRIS M, et al. Antimicrobial activity of chitosan, organic acids and nano-sized solubilisates for potential use in smart antimicrobially-active packaging for potential food applications[J]. Food Control, 2013, 34(2): 393-397.
本文引用 [1]
40
LIU Y, WANG S, LAN W, et al. Fabrication of polylactic acid/carbon nanotubes/chitosan composite fibers by electrospinning for strawberry preservation[J]. International Journal of Biological Macromolecules, 2019, 121: 1329-1336.
本文引用 [1]
41
OTHMAN S H, WANE B M, NORDIN N, et al. Physical, mechanical, and water vapor barrier properties of starch/cellulose nanofiber/thymol bionanocomposite films[J]. Polymers, 2021, DOI: 10.3390/polym13234060.
本文引用 [1]
42
陈欢欢,陈凯凯,杨慕容,等.聚乳酸/百里酚抗菌纤维的制备与性能[J].纺织学报,2023,44(2):34-43.
本文引用 [1]
43
杨倩倩,应玲英,邓炳耀,等.聚乳酸/芦荟苷共混纤维的制备及其性能测试[J].上海纺织科技,2022,50(4):34-38.
本文引用 [1]
44
邢承宇.精油纳米颗粒的制备及抑菌活性研究[D].无锡:江南大学,2022.
本文引用 [1]
45
蒙文钊.柠檬精油/聚乳酸纳米纤维膜对奶豆腐品质的影响[D].呼和浩特:内蒙古农业大学,2021.
本文引用 [1]
46
王飞杰,王利强,张新昌.聚乳酸-纳米氧化锌复合疏水抗菌食品包装纸的制备及其在鲜肉保鲜中的应用[J].中国食品学报,2022,22(5):228-238.
本文引用 [1]
47
何依谣.聚乳酸/纳米纤维素可降解食品包装薄膜的研究及其在西兰花保鲜中的应用[D].杭州:浙江大学,2018.
本文引用 [1]
48
ALTANA A, AYTAC Z, UYAR T. Carvacrol loaded electrospun fibrous films from Zein and poly(lacticacid) for active food packaging[J]. Food Hydrocolloids, 2018, 81: 48-59.
本文引用 [1]
49
LLANA-RUÍZ-CABELLO M, PUERTO M, PICHARDO S, et al. Preservation of phytosterol and PUFA during ready-to-eat lettuce shelf-life in active bio-package[J]. Food Packaging and Shelf Life, 2019, DOI: 10.1016/j.fpsl.2019.100410.
本文引用 [1]
50
云雪艳.高韧性、高选择透过性聚乳酸薄膜的制备及其对果蔬的气调保鲜效果[D].呼和浩特:内蒙古农业大学,2017.
本文引用 [1]
51
MALEKI H, SEMNANI RAHBAR R, NAZIR A. Improvement of physical and mechanical properties of electrospun poly(lactic acid) nanofibrous st ructures[J]. Iranian Polymer Journal, 2020, 29: 841-851.
本文引用 [1]
52
董青.石墨烯掺杂PLA纳米纤维膜的研究[D].苏州:苏州大学,2015.
本文引用 [1]
53
GOMAA S F, MADKOUR T M, MOGHANNEM S, et al. New polylactic acid/cellulose acetate-based antimicrobial interactive single dose nanofibrous wound dressing mats[J]. International Journal of Biological Macromolecules, 2017, 105: 1148-1160.
本文引用 [1]
54
李亮,裴斐斐,刘淑萍,等.聚乳酸纳米纤维基载药敷料的制备与表征[J].纺织学报,2022,43(11):1-8.
本文引用 [1]
55
BI H, FENG T, LI B, et al. In vitro and in vivo comparison study of electrospun PLA and PLA/PVA/SA fiber membranes for wound healing[J]. Polymers, 2020, 12(4): 839-839.
本文引用 [1]

基金

装发快速扶持项目第二阶段

评论

PDF(715 KB)

Accesses

Citation

Detail
段落导航
相关文章
Copyright 中国高校科技期刊信息汇聚平台 2024-2025
技术支持：北京玛格泰克科技发展有限公司
京ICP备05021913号-19

/

〈 〉