
Progress in tribological modification of PTFE
Qiaosi ZHU
Progress in tribological modification of PTFE
Polytetrafluoroethylene (PTFE), as a special engineering plastic, has many advantages such as excellent self-lubricating properties, good chemical stability, and a wide range of operating temperatures. However, its core disadvantages are poor wear resistance and easy wear, which seriously shorten its service life. Starting from the structural characteristics of PTFE molecules, this article takes the transfer film theory as the main thread to deeply analyze the friction and wear mechanism of PTFE and the research and development process. It summarizes the tribological modification methods of PTFE, analyzes the common methods of surface modification, filling modification, and blending modification, compares the internal mechanisms of these three types of modification methods, and summarizes the development trend of composite modification. Finally, based on recent research achievements and existing problems in the research process, the research direction of PTFE tribological modification is discussed, some suggestions on the quantitative study of transfer film, the industrial feasibility of multimode type collaborative composite modification, the selection and application of modification system under actual working conditions are given.
polytetrafluoroethylene / tribology / transfer film / composite modification
[1] |
|
[2] |
|
[3] |
|
[4] |
|
[5] |
|
[6] |
温诗铸,黄平,田煜,等.摩擦学原理[M].5版.北京:清华大学出版社,2018:268-294.
|
[7] |
王承鹤.塑料摩擦学——塑料的摩擦、磨损、润滑理论与实践[M].北京:机械工业出版社,1994:229-252.
|
[8] |
|
[9] |
|
[10] |
|
[11] |
|
[12] |
|
[13] |
|
[14] |
|
[15] |
|
[16] |
|
[17] |
|
[18] |
|
[19] |
景亚宾. 聚四氟乙烯粉料的萘钠处理及其性能测试[J]. 化工生产与技术,2016,23(5):10-12.
|
[20] |
张招柱,薛群基,沈维长,等. 金属填充PTFE复合材料的摩擦磨损性能研究[J]. 高分子材料科学与工程,1999(1):69-73.
|
[21] |
张招柱,薛群基,刘维民,等. 几种金属氧化物填充聚四氟乙烯复合材料在干摩擦条件下的摩擦磨损性能[J]. 摩擦学学报,1997,17(1):46-53.
|
[22] |
张招柱,薛群基,刘维民,等. 金属硫化物及石墨填充PTFE复合材料的摩擦磨损性能研究[J]. 复合材料学报,1999,16(4):58-63.
|
[23] |
|
[24] |
|
[25] |
|
[26] |
|
[27] |
|
[28] |
|
[29] |
|
[30] |
|
[31] |
|
[32] |
程先华,薛玉君,谢超英. 稀土处理玻璃纤维填充PTFE复合材料的滑动磨损性能[J]. 复合材料学报,2003,20(3):108-112.
|
[33] |
|
[34] |
|
[35] |
|
[36] |
包丹丹,程先华. 稀土处理炭纤维填充聚四氟乙烯复合材料在干摩擦条件下的摩擦磨损性能研究[J]. 摩擦学学报,2006,26(2):135-139.
|
[37] |
叶素娟,禹权,黄承亚. 纤维填充PTFE复合材料的摩擦学研究[J]. 塑料工业,2006,34(6):46-49.
|
[38] |
禹权,叶素娟. 硅灰石纤维改性PTFE材料摩擦性研究[J]. 工程塑料应用,2012,40(4):73-75.
|
[39] |
孙庆杰,冯新,汪怀远,等. 硅灰石形貌和尺寸因素对PTFE复合材料摩擦学性能的影响[J]. 高分子材料科学与工程,2009,25(5):56-59.
|
[40] |
孙庆杰,冯新,王海棠,等. 硅灰石的表面改性对其填充PTFE复合材料摩擦学性能和力学性能的影响[J]. 工程塑料应用,2008,36(8):13-16.
|
[41] |
|
[42] |
|
[43] |
|
[44] |
王晨,白志民,于鹤龙. 叶蛇纹石和硅灰石对聚四氟乙烯摩擦磨损行为的影响[J]. 硅酸盐学报,2024,52(6):2081-2093.
|
[45] |
吴迪,白志民,张晶. 凹凸棒石-硅灰石/PTFE复合材料摩擦磨损性能及其机理[J]. 硅酸盐学报,2021,49(10):2078-2088.
|
[46] |
江波,周倩倩,朱爱萍,等. 埃洛石-玻纤/聚四氟乙烯复合材料的摩擦磨损热膨胀及力学性能[J]. 复合材料学报,2016,33(9):1999-2005.
|
[47] |
|
[48] |
赵凯,党智敏. 四针状氧化锌晶须/聚四氟乙烯复合材料的电气性能研究[J]. 绝缘材料,2011,44(3):49-52.
|
[49] |
张军凯,郑志武,汪小伟,等. 硫酸钙晶须改性聚四氟乙烯的摩擦磨损性能研究[J]. 塑料工业,2012,40(10):41-44.
|
[50] |
张招柱,薛群基,刘维民,等. 纤维及晶须增强PTFE复合材料的摩擦磨损性能研究[J]. 高分子材料科学与工程,2001,17(4):90-93.
|
[51] |
冯新,陈东辉,江晓红,等. 钛酸钾晶须增强聚四氟乙烯复合材料的摩擦磨损性能[J]. 高分子材料科学与工程,2004,20(5):129-132.
|
[52] |
|
[53] |
冯新,汪怀远,王昌松,等. 钛酸钾晶须增强聚四氟乙烯复合材料性能的研究[J]. 材料科学与工艺,2006,14(3):312-315.
|
[54] |
|
[55] |
|
[56] |
|
[57] |
郑占模,董从林,袁成请,等.二硫化钼的粒径对聚氨酯复合材料摩擦学性能的影响[J].表面技术,2023,52(8):161-172.
|
[58] |
林启权,毛波,董文正,等. 二硫化钼与二硫化钨填充改性聚四氟乙烯的摩擦学性能[J]. 高分子材料科学与工程,2016,32(11):51-57.
|
[59] |
|
[60] |
|
[61] |
|
[62] |
|
[63] |
|
[64] |
|
[65] |
|
[66] |
|
[67] |
|
[68] |
蒲吉斌,王立平,薛群基. 石墨烯摩擦学及石墨烯基复合润滑材料的研究进展[J]. 摩擦学学报,2014,34(1):93-112.
|
[69] |
朱巧思,李炯利,郭建强,等. 石墨烯理化参数对低含量石墨烯填充聚四氟乙烯摩擦磨损的影响[J]. 航空材料学报,2020,40(4):9-18.
|
[70] |
见雪珍,李华,房光强,等. 含碳纳米管、石墨烯的PTFE基复合材料摩擦磨损性能[J]. 功能材料,2014,45(3):3011-3016.
|
[71] |
张之圣,李海燕. 碳纳米管的制备、表征及其在电子领域中的应用[J]. 无机材料学报,2003,18(3):527-532.
|
[72] |
何春霞,万芳新,张静,等. 碳纳米管增强PTFE复合材料摩擦磨损性能研究[J]. 润滑与密封,2006(12):110-112.
|
[73] |
夏军宝,陈卫祥,李飞,等. 碳纳米管/PTFE基复合材料摩擦学性能的研究[J]. 浙江大学学报(工学版),2003,37(4):95-98.
|
[74] |
|
[75] |
|
[76] |
|
[77] |
|
[78] |
|
[79] |
|
[80] |
|
[81] |
|
[82] |
张在利,曾子敏,李嘉,等. 耐高温低磨耗聚苯酯改性聚四氟乙烯[J]. 化工新型材料,2002,30(8):1-5.
|
[83] |
赵普,刘近朱,王齐华,等. 聚苯酯、聚酰亚胺填充聚四氟乙烯复合材料的摩擦学性能研究[J]. 材料科学与工程学报,2003,21(6):851-854.
|
[84] |
贾晓梅,王黎钦,古乐,等. 聚苯酯填充聚四氟乙烯复合材料摩擦学行为研究[J]. 润滑与密封,2005(5):16-18.
|
[85] |
|
[86] |
李文忠,王黎钦,古乐,等. 聚合物填充聚四氟乙烯复合材料的摩擦磨损性能[J]. 润滑与密封,2006(10):8-11.
|
[87] |
宋明斌,张立祥,沈兆龙,等. 聚丙烯腈填充聚四氟乙烯复合材料摩擦磨损性能研究[J]. 材料工程,2006(10):52-55.
|
[88] |
|
[89] |
高贵,王宏刚,任俊芳,等. 有机填料填充聚四氟乙烯复合材料摩擦学及力学性能[J]. 润滑与密封,2014,39(6):83-86.
|
[90] |
刘树博,王子君,张宏娜,等. 聚四氟乙烯/芳纶纤维复合材料的制备工艺研究[J]. 化工新型材料,2020,48(12):48-51.
|
[91] |
|
[92] |
|
[93] |
|
[94] |
|
[95] |
唐炜,朱宝亮,刘家浚,等. 液晶微纤原位增强PTFE复合材料抗磨性能与磨损机理[J]. 摩擦学学报,2000,20(1):12-15.
|
[96] |
|
[97] |
汪怀远,冯新,史以俊,等. 纳米TiO2与炭纤维协同填充PTFE复合材料的摩擦磨损性能[J]. 高分子材料科学与工程,2007,23(4):89-93.
|
[98] |
|
[99] |
路琴,杨明. 纳米SiC及其与石墨、二硫化钼填充PTFE基复合材料摩擦磨损性能研究[J]. 中国塑料,2009,23(3):28-31.
|
[100] |
黄承亚,龚克成,蔡立芳,等. 无机填料增强聚苯酯/聚四氟乙烯复合材料的力学和摩擦磨损性能[J]. 复合材料学报,2006,23(4):36-40.
|
[101] |
何鹏,冯新,汪怀远,等. 纤维/ekonol/PTFE复合材料的力学与摩擦学性能研究[J]. 功能材料,2007,38(12):2044-2047.
|
[102] |
|
[103] |
|
[104] |
|
[105] |
|
[106] |
|
[107] |
|
[108] |
|
[109] |
|
[110] |
魏莉岚,魏刚,蒋雨江,等. 石墨/Cr2O3协同改性PTFE/硅灰石材料摩擦学性能[J]. 工程塑料应用,2022,50(2):117-122.
|
[111] |
伍雨驰,雷磊,刘旻帑,等. 陶瓷框架增强聚四氟乙烯仿生复合材料及其摩擦学性能研究[J]. 摩擦学学报,2024,44(10): 1429-1440.
|
[112] |
刘林,汤赫男,王妍,等. 烧结温度对石墨烯填充聚醚醚酮/聚四氟乙烯摩擦磨损性能的影响[J]. 高分子材料科学与工程,2024,40(3):98-109.
|
/
〈 |
|
〉 |