绿色低温法制备Fe3O4及其复合材料吸波性能

潘虹, 胡磊, 徐丽慧, 王以红, 李凯, 沈勇, 王黎明, 丁颖

PDF(7504 KB)
PDF(7504 KB)
材料工程 ›› 2025, Vol. 53 ›› Issue (4) : 150-162. DOI: 10.11868/j.issn.1001-4381.2023.000610
研究论文

绿色低温法制备Fe3O4及其复合材料吸波性能

作者信息 +

Fe3O4 prepared by green low temperature method and its composites absorbing property

Author information +
History +

摘要

铁氧体作为常见的磁损耗型吸波材料,制备方法对其结构以及吸波性能的影响至关重要。传统的铁氧体制备多采用高温高压的溶剂热或者水热法制备,耗能大,材料后续复合时兼容性差。以氯化亚铁作为铁源,利用硝酸钾对亚铁离子进行可控的氧化反应,采用低温(50 ℃)共沉淀法制备了正八面体结构的Fe3O4,研究了不同反应条件制备产物的吸波效果,并将其与介电材料NiCo2O4复合,制备的复合材料具有较好的吸波性能。低温法降低了对生产设备的要求,减小了耗能,提高了材料复合的兼容性,大大拓宽了铁氧体材料的应用范围。

Abstract

Ferrite, a prevalent magnetic loss absorbing material, underscores the significance of its preparation method in determining both its structure and absorbing properties. Traditionally, ferrites are predominantly synthesized through solvothermal or hydrothermal methods, which entail substantial energy consumption and exhibit limited compatibility with other materials. Octahedral Fe3O4 is successfully synthesized via a low-temperature (50 ℃) co-precipitation process, utilizing ferrous chloride as the iron source. The oxidation reaction is meticulously controlled using potassium nitrate. Furthermore, the absorption effectiveness of the resultant product under various reaction conditions is thoroughly examined. Notably, the composite material formed by combining NiCo2O4 and Fe3O4 exhibits superior absorbing properties. This low-temperature approach not only mitigates the demands on equipment and energy consumption but also enhances material compatibility, thereby significantly expanding the application scope of ferrite materials.

关键词

铁氧体 / 电磁吸波材料 / 低温制备 / 复合材料

Key words

ferrite / electromagnetic wave absorbing material / low temperature preparation / composite material

中图分类号

TB331

引用本文

导出引用
潘虹 , 胡磊 , 徐丽慧 , . 绿色低温法制备Fe3O4及其复合材料吸波性能. 材料工程. 2025, 53(4): 150-162 https://doi.org/10.11868/j.issn.1001-4381.2023.000610
Hong PAN, Lei HU, Lihui XU, et al. Fe3O4 prepared by green low temperature method and its composites absorbing property[J]. Journal of Materials Engineering. 2025, 53(4): 150-162 https://doi.org/10.11868/j.issn.1001-4381.2023.000610

参考文献

[1]
ALBALAWI A E KHALAF A K ALYOUSIF M S, et al. Fe3O4@piroctone olamine magnetic nanoparticles: synthesize and therapeutic potential in cutaneous leishmaniasis[J]. Biomedicine & Pharmacotherapy2021139: 111566.
[2]
LIU J GHANIZADEH H LI X, et al. Facile synthesis of core/shell Fe3O4@mSiO2(Hb) and its application for organic wastewater treatment[J]. Environmental Research2022203: 111796.
[3]
ADEBAYO L L SOLEIMANI H GUAN B H, et al. A simple route to prepare Fe3O4@C microspheres as electromagnetic wave absorbing material[J]. Journal of Materials Research and Technology202112: 1552-1563.
[4]
HUANG W WANG Y WEI S, et al. Effect of reaction time on microwave absorption properties of Fe3O4 hollow spheres synthesized via Ostwald ripening[J]. Materials201912(18): 2921.
[5]
ZHANG H ZHAO J, OU X. Facile synthesis of Fe3O4 nanowires at low temperature (80 ℃) without autoclaves and their electromagnetic performance[J].Materials Letters2017209: 48-51.
[6]
WEI S WANG X ZHANG B, et al. Preparation of hierarchical core-shell C@NiCo2O4@Fe3O4 composites for enhanced microwave absorption performance[J]. Chemical Engineering Journal2017314: 477-487.
[7]
XIANG G H CHEN M Y NI Z W, et al. Synthesis of a hollow-structured flower-like Fe3O4@MoS2 composite and its microwave-absorption properties[J]. RSC Advances202111(33): 20180-20190.
[8]
CHENG J P WANG W D WANG X C, et al. Recent research of core-shell structured composites with NiCo2O4 as scaffolds for electrochemical capacitors[J]. Chemical Engineering Journal2020393: 124747.
[9]
SHEN L F YU L YU X Y, et al. Self-templated formation of uniform NiCo2O4 hollow spheres with complex interior structures for lithium-ion batteries and supercapacitors[J]. Angewandte Chemie-International Edition201554(6): 1868-1872.
[10]
LI K SHEN Y XU L H, et al. Achieving electromagnetic wave absorption capabilities by fabrication of flower-like structure NiCo2O4 derived from low-temperature co-precipitation [J].Vacuum2022205:111493.
[11]
MENG F WEI W CHEN X, et al. Design of porous C@Fe3O4 hybrid nanotubes with excellent microwave absorption[J]. Physical Chemistry Chemical Physics201618(4): 2510-2516.
[12]
MEDINA B VERDÉRIO FRESSATI M G GONÇALVES J M, et al. Solventless preparation of Fe3O4 and Co3O4 nanoparticles: a mechanochemical approach[J]. Materials Chemistry and Physics2019226: 318-322.
[13]
QIN M LAN D WU G, et al. Sodium citrate assisted hydrothermal synthesis of nickel cobaltate absorbers with tunable morphology and complex dielectric parameters toward efficient electromagnetic wave absorption[J]. Applied Surface Science2020504: 144480.
[14]
LIU J LIANG H WU H. Hierarchical flower-like Fe3O4/MoS2 composites for selective broadband electromagnetic wave absorption performance[J]. Composites Part A2020130: 105760.
[15]
CHAI L WANG Y JIA Z, et al. Tunable defects and interfaces of hierarchical dandelion-like NiCo2O4 via Ostwald ripening process for high-efficiency electromagnetic wave absorption[J]. Chemical Engineering Journal2022429: 132547.
[16]
ZHAN Y XIA L YANG H, et al. Tunable electromagnetic wave absorbing properties of carbon nanotubes/carbon fiber composites synthesized directly and rapidly via an innovative induction heating technique[J]. Carbon2021175: 101-111.
[17]
LIU X ZHAO X YAN J, et al. Enhanced electromagnetic wave absorption performance of core-shell Fe3O4@poly(3,4-ethylenedioxythiophene) microspheres/reduced graphene oxide composite[J]. Carbon2021178: 273-284.
[18]
WU H ZHAO Z WU G. Facile synthesis of FeCo layered double oxide/raspberry-like carbon microspheres with hierarchical structure for electromagnetic wave absorption[J]. Journal of Colloid and Interface Science2020566: 21-32.
[19]
QIAN Y TAO Y LI W, et al. High electromagnetic wave absorption and thermal management performance in 3D CNF@C-Ni/epoxy resin composites[J]. Chemical Engineering Journal2021425: 131608.
[20]
WU N LIU C XU D, et al. Enhanced electromagnetic wave absorption of three-dimensional porous Fe3O4/C composite flowers[J]. ACS Sustainable Chemistry & Engineering20186(9): 12471-12480.
[21]
DONG B WANG X M. The study and application of electromagnetic wave absorption materials research[J]. Applied Mechanics and Materials2014651/653: 137-140.
[22]
LI Z LIN H DING S, et al. Synthesis and enhanced electromagnetic wave absorption performances of Fe3O4@C decorated walnut shell-derived porous carbon[J]. Carbon2020167: 148-159.
[23]
WANG R HE M ZHOU Y, et al. Metal-organic frameworks self-templated cubic hollow Co/N/C@MnO2 composites for electromagnetic wave absorption[J]. Carbon2020156: 378-388.
[24]
WANG J CUI Y WU F, et al. Core-shell structured Fe/Fe3O4@TCNFs@TiO2 magnetic hybrid nanofibers: preparation and electromagnetic parameters regulation for enhanced microwave absorption[J]. Carbon2020165: 275-285.
[25]
WEN J LI X CHEN G, et al. Controllable adjustment of cavity of core-shelled Co3O4@NiCo2O4 composites via facile etching and deposition for electromagnetic wave absorption[J]. Journal of Colloid and Interface Science2021594: 424-434.
[26]
QUAN B LIANG X JI G, et al. Cross-linking-derived synthesis of porous Co x Ni y /C nanocomposites for excellent electromagnetic behaviors[J]. ACS Applied Materials & Interfaces20179(44): 38814-38823.
[27]
XIE S GUO X N JIN G Q, et al. Carbon coated Co-SiC nanocomposite with high-performance microwave absorption[J]. Physical Chemistry Chemical Physics201315(38): 16104-16110.
[28]
YUAN X CHENG L KONG L, et al. Preparation of titanium carbide nanowires for application in electromagnetic wave absorption[J]. Journal of Alloys and Compounds2014596: 132-139.
[29]
DONG S TANG W HU P, et al. Achieving excellent electromagnetic wave absorption capabilities by construction of MnO nanorods on porous carbon composites derived from natural wood via a simple route[J]. ACS Sustainable Chemistry & Engineering20197(13): 11795-11805.
[30]
WU H J QIN M ZHANG L M. NiCo2O4 constructed by different dimensions of building blocks with superior electromagnetic wave absorption performance[J]. Composites Part B2020182: 107620.
[31]
YUSUF J Y SOLEIMANI H NOORHANA Y, et al. Recent advances and prospect of cobalt based microwave absorbing materials [J]. Ceramics International202046(17): 26466-26485.
[32]
LIAO Z MA M TONG Z, et al. Fabrication of ZnFe2O4/C@PPy composites with efficient electromagnetic wave absorption properties[J]. Journal of Colloid and Interface Science2021602: 602-611.
[33]
DING D WANG Y LI X, et al. Rational design of core-shell Co@C microspheres for high-performance microwave absorption[J]. Carbon2017111: 722-732.
[34]
LI R GAO Q XING H, et al. Lightweight, multifunctional MXene/polymer composites with enhanced electromagnetic wave absorption and high-performance thermal conductivity[J]. Carbon2021183: 301-312.
[35]
于永涛,刘元军.原位聚合法制备铁氧体/聚苯胺吸波复合材料的研究进展[J].材料工程202250(5):90-99.
YU Y T LIU Y J. Research progress in preparation of ferrite/polyaniline absorbing composites by in situ polymerization[J]. Journal of Materials Engineering202250(5): 90-99.
[36]
LV H LIANG X CHENG Y, et al. Coin-like α-Fe2O3@CoFe2O4 core-shell composites with excellent electromagnetic absorption performance[J]. ACS Applied Materials & Interfaces20157(8): 4744-4750.
[37]
ZHOU J WEI B WANG M, et al. Three dimensional flower like ZnFe2O4 ferrite loaded graphene: enhancing microwave absorption performance by constructing microcircuits[J]. Journal of Alloys and Compounds2021889: 161734.
[38]
尹贻超,杨楠楠,张行,等.片状FeSiAl合金粉的制备及低频吸波性能[J].航空材料学报202141(4):141-148.
YIN Y C YANG N N ZHANG H,et al. Preparation and low-frequency absorbing properties of flaky FeSiAl alloy[J]. Journal of Aeronautical Materials202141(4): 141-148.

基金

上海自然科学基金项目(21ZR1426200)

评论

PDF(7504 KB)

Accesses

Citation

Detail

段落导航
相关文章

/