Preparation of PP/POE Composites and Their Flame Retardancy and Durability Properties

JIANG Hao, QI Huifang

PDF(1339 KB)
PDF(1339 KB)
Plastics Science and Technology ›› 2025, Vol. 53 ›› Issue (02) : 59-63. DOI: 10.15925/j.cnki.issn1005-3360.2025.02.011
Theory and Research

Preparation of PP/POE Composites and Their Flame Retardancy and Durability Properties

Author information +
History +

Abstract

Polyolefin elastomer (POE) was used as the main toughening agent to prepare polypropylene (PP) composites with different POE contents. The effects of different POE contents on the flame retardancy and durability of PP composites were compared, and their applicability as building materials was further explored. The results showed that the PP composite with 6% POE content exhibited the best flame-retardant performance, with the highest limiting oxygen index (29.9%) and the lowest total heat release (128.3 MJ/m²) and heat release rate (574.7 kW/m²). In the durability tests, compared with pure polypropylene material, the PP composite with 6% POE content also maintained excellent flame-retardant and mechanical properties. After 72 h of aging, it showed the lowest degree of decline in mechanical and flame-retardant properties. Therefore, it has the potential to be used as a building material with broad application prospects.

Key words

Polypropylene / Polyefin elastomer / Flame retardancy / Durability

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations
JIANG Hao , QI Huifang. Preparation of PP/POE Composites and Their Flame Retardancy and Durability Properties. Plastics Science and Technology. 2025, 53(02): 59-63 https://doi.org/10.15925/j.cnki.issn1005-3360.2025.02.011

References

List( Publishing order | Descend order by publishing year | Descend order by cited within ) Chart analysis
1
孙嘉琦,刘曦,王传林,等.硅烷偶联剂改性聚丙烯纤维水泥基复合材料的性能研究[J].硅酸盐通报,2024,43(7):2355-2362, 2371.
本文引用 [1]
2
胡黄飞,王凯,江舒,等.回收碳纤维/剑麻增强聚丙烯复合材料的力学性能[J].工程塑料应用,2024,52(7):1-7.
本文引用 [1]
3
杨莲,蒋晶,贾彩宜,等.聚酰胺6微纤增强聚丙烯复合材料制备及化学注塑发泡性能研究[J].中国塑料,2024,38(6):12-18.
本文引用 [1]
4
郝兴天,刘瑞,胡礼珍,等.聚丙烯种类对丁基橡胶/聚丙烯热塑性硫化胶性能的影响[J].橡胶工业,2024,71(7):513-517.
本文引用 [1]
5
SHUBHRA Q T H, ALAM A K M M, QUAIYYUM M A. Mechanical properties of polypropylene composites: A review[J]. Journal of Thermoplastic Composite Materials, 2013, 26(3): 362-391.
本文引用 [1]
6
HIMMA N F, ANISAH S, PRASETYA N, et al. Advances in preparation, modification, and application of polypropylene membrane[J]. Journal of Polymer Engineering, 2016, 36(4): 329-362.
本文引用 [1]
7
VARGA J. β-modification of isotactic polypropylene: Preparation, structure, processing, properties, and application[J]. Journal of Macromolecular Science, Part B: 2002, 41(4/6): 1121-1171.
本文引用 [1]
8
KAZAYAWOKO M, BALATINECZ J J, MATUANA L M. Surface modification and adhesion mechanisms in woodfiber-polypropylene composites[J]. Journal of Materials Science, 1999, 34: 6189-6199.
本文引用 [1]
9
THAKUR V K, VENNERBERG D, KESSLER M R. Green aqueous surface modification of polypropylene for novel polymer nanocomposites[J]. ACS Applied Materials & Interfaces, 2014, 6(12): 9349-9356.
本文引用 [1]
10
GIAVARINI C, DE FILIPPIS P, SANTARELLI M L, et al. Production of stable polypropylene-modified bitumens[J]. Fuel, 1996, 75(6): 681-686.
本文引用 [1]
11
赵锦博,王炳涛,郭云馨,等.苯基膦酸铈协效阻燃IFR/PP复合材料的制备[J/OL].复合材料学报,1-8[2024-07-30].
https://doi.org/10.13801/j.cnki.fhclxb.20240722.009
本文引用 [1]
12
游一兰,贺国文,孟洪量,等.回收聚丙烯纳米复合材料的性能[J].塑料工业,2024,52(3):138-143.
本文引用 [1]
13
杨晓龙,刘晨曦,李云东,等.磷酸硼协效膨胀型阻燃剂对聚丙烯阻燃性能的研究[J].塑料科技,2022,50(8):72-76.
本文引用 [1]
14
AL-HADIDY A I, TAN Y Q. Mechanistic approach for polypropylene-modified flexible pavements[J]. Materials & Design, 2009, 30(4): 1133-1140.
本文引用 [1]
15
KANG M S, CHUN B, KIM S S. Surface modification of polypropylene membrane by low‐temperature plasma treatment[J]. Journal of Applied Polymer Science, 2001, 81(6): 1555-1566.
16
ZHANG J, DE JUAN S, ESTEBAN-CUBILLO A, et al. Effect of organo-modified nanosepiolite on fire behaviors and mechanical performance of polypropylene composites[J]. Chinese Journal of Chemistry, 2015, 33(2): 285-291.
本文引用 [1]
17
DAS O, KIM N K, KALAMKAROV A L, et al. Biochar to the rescue: Balancing the fire performance and mechanical properties of polypropylene composites[J]. Polymer Degradation and Stability, 2017, 144: 485-496.
本文引用 [1]
18
ARJMANDI R, ISMAIL A, HASSAN A, et al. Effects of ammonium polyphosphate content on mechanical, thermal and flammability properties of kenaf/polypropylene and rice husk/polypropylene composites[J]. Construction and Building Materials, 2017, 152: 484-493.
本文引用 [1]
19
SCHIRP A, BARRIO A. Fire retardancy of polypropylene composites reinforced with rice husks: From oxygen index measurements and cone calorimetry to large-scale single-burning-item tests[J]. Journal of Applied Polymer Science, 2018, 135(37): 46654.
本文引用 [1]
20
NIE S B, ZHANG C, PENG C, et al. Study of the synergistic effect of nanoporous nickel phosphates on novel intumescent flame retardant polypropylene composites[J]. Journal of Spectroscopy, 2015, 2015(1): 289298.
21
ZHAO W J, HU Q X, ZHANG N N, et al. In situ inorganic flame retardant modified hemp and its polypropylene composites[J]. RSC Advances, 2017, 7(51): 32236-32245.
22
TANG W F, ZHANG S, SUN J, et al. Effects of surface acid-activated kaolinite on the fire performance of polypropylene composite[J]. Thermochimica Acta, 2017, 648: 1-12.
本文引用 [1]
23
CHEN W Y, YUAN S S, SHENG Y, et al. Effect of charring agent THEIC on flame retardant properties of polypropylene[J]. Journal of Applied Polymer Science, 2015, DOI:10.1002/app.41214.
本文引用 [1]
24
UNTERWEGER C, DUCHOSLAV J, STIFTER D, et al. Characterization of carbon fiber surfaces and their impact on the mechanical properties of short carbon fiber reinforced polypropylene composites[J]. Composites Science and Technology, 2015, 108: 41-47.
本文引用 [1]
25
ZAHARI W Z W, BADRI R, ARDYANANTA H, et al. Mechanical properties and water absorption behavior of polypropylene/ijuk fiber composite by using silane treatment[J]. Procedia Manufacturing, 2015, 2: 573-578.
本文引用 [1]
26
ZULKIFLI N I, SAMAT N, ANUAR H, et al. Mechanical properties and failure modes of recycled polypropylene/microcrystalline cellulose composites[J]. Materials & Design, 2015, 69: 114-123.
本文引用 [1]
27
SPOERK M, SAVANDAIAH C, ARBEITER F, et al. Optimization of mechanical properties of glass‐spheres‐filled polypropylene composites for extrusion‐based additive manufacturing[J]. Polymer Composites, 2019, 40(2): 638-651.
28
THENEPALLI T, JUN A Y, HAN C, et al. A strategy of precipitated calcium carbonate (CaCO 3) fillers for enhancing the mechanical properties of polypropylene polymers[J]. Korean Journal of Chemical Engineering, 2015, 32: 1009-1022.
29
KHALAJ M J, AHMADI H, LESANKHOSH R, et al. Study of physical and mechanical properties of polypropylene nanocomposites for food packaging application: Nano-clay modified with iron nanoparticles[J]. Trends in Food Science & Technology, 2016, 51: 41-48.
本文引用 [1]

Comments

PDF(1339 KB)

Accesses

Citation

Detail
Sections
Recommended
Copyright © Plastics Science and Technology, All Rights Reserved.
Powered by Beijing Magtech Co. Ltd.

/

〈 〉