Study on Preparation and Properties of Anti-Aging PP Composite Pipes

CHEN Feng, DONG Bin

PDF(1403 KB)
PDF(1403 KB)
Plastics Science and Technology ›› 2024, Vol. 52 ›› Issue (10) : 61-65. DOI: 10.15925/j.cnki.issn1005-3360.2024.10.011
Theory and Research

Study on Preparation and Properties of Anti-Aging PP Composite Pipes

Author information +
History +

Abstract

The polyolefin elastomer (POE) was added to polypropylene (PP) to prepare PP composites, and the influence of different POE content on the properties of PP composites was explored. The results show that in terms of the mechanical properties of the material, the tensile strength decreases with the increase of POE content of the thermoplastic elastomer, while the elongation at break, bending strength and impact strength increase first and then decrease with the increase of POE content of the thermoplastic elastomer. Due to the addition of the filler, the composites have good thermal stability and reach the maximum value when the mass fraction of POE is 6%, and the mechanical properties are also optimal. After aging, compared with pure PP materials, PP composites can also maintain their excellent mechanical properties. Therefore, the prepared PP composites can be used in building water supply.

Key words

Polypropylene / Polyolefin elastomer / Aging resistance / Building water supply material

Cite this article

Download Citations
CHEN Feng , DONG Bin. Study on Preparation and Properties of Anti-Aging PP Composite Pipes. Plastics Science and Technology. 2024, 52(10): 61-65 https://doi.org/10.15925/j.cnki.issn1005-3360.2024.10.011

References

1
杨颖.探讨建筑给水排水工程的设计优化[J].国际建筑学,2023,5(6):85-87.
2
WEI X Y. Research on the selection of pipe materials for water supply and drainage[C]//E3S Web of Conferences. EDP Sciences, 2021, DOI: 10.1051/e3sconf/202123602031.
3
STOIAN E V, ENESCU M C, PETRE I C, et al. Experimental researches on the behavior of polypropylene pipes at the physical-mechanical testing[J]. Materiale Plastice, 2020, 57(2): 23-31.
4
ARTHUR E K, GIKUNOO E, AGYEMANG F O, et al. Material selection for water pipes by the multi-objective decision-making method: the case of alternative materials for PVC pipes[J]. Journal of Science Technology, 2020, 5(1): 29-42.
5
WEI T Y, CHEN G Q. Optimal selection on water-supply pipe of building based on analytic hierarchy process[C]//IOP Conference Series: Earth and Environmental Science. IOP Publishing, 2017, DOI 10.1088/1755-1315/61/1/012108.
6
巩学雷.建筑给排水工程中节能节水技术的应用探究[J].国际建筑学,2020,2(9):9.
7
STEFAN D S, BOSOMOIU M, TEODORESCU G. The behavior of polymeric pipes in drinking water distribution system—Comparison with other pipe materials[J]. Polymers, 2023, DOI: 10.3390/polym15193872.
8
YUAN Y, LIU C D, HUANG M N. The structure and performance of short glass fiber/high-density polyethylene/polypropylene composite pipes extruded using a shearing-drawing compound stress field[J]. Materials, 2019, DOI: 10.3390/ma12081323.
9
付一政,曲宁,曲静波,等.几种不同结构型号PE改性PPR力学性能的研究[J].塑料,2005(4):38-40.
10
邹敏,朱世富,赵北君,等.ZnO晶须/纳米TiO2复合粒子改善PP-R树脂性能的研究[J].功能材料,2005(5):743-745, 749.
11
WANG Y T, LU L C, HAO Y, et al. Mechanical and processing enhancement of a recycled HDPE/PPR-based double-wall corrugated pipe via a POE-g-MAH/CaCO3/HDPE polymer composite[J]. ACS Omega, 2021, 6(30): 19705-19716.
12
KHOURY MOUSSA H, CHALLITA G, BADREDDINE H, et al. Enhancement of mechanical properties of high modulus polypropylene grade for multilayer sewage pipes applications[J]. Journal of Applied Polymer Science, 2023, DOI:10.1002/app.53314.
13
ÜSTÜN T, ESKIZEYBEK V, AVCI A. Enhanced fatigue performances of hybrid nanoreinforced filament wound carbon/epoxy composite pipes[J]. Composite Structures, 2016, 150: 124-131.
14
GASSAN J, BLEDZKI A K. Possibilities to improve the properties of natural fiber reinforced plastics by fiber modification-jute polypropylene composites[J]. Applied Composite Materials, 2000, 7: 373-385.
15
LUO G J, LI W Z, LIANG W B, et al. Coupling effects of glass fiber treatment and matrix modification on the interfacial microstructures and the enhanced mechanical properties of glass fiber/polypropylene composites[J]. Composites Part B: Engineering, 2017, 111: 190-199.
16
CHENG F, QIU B W, WANG B, et al. Balanced toughening and strengthening of ethylene-propylene rubber toughened isotactic polypropylene using a poly(styrene-b-ethylene)deblock copolymer[J]. RSC Adv, 2015, 5(27): 20831-20837.
17
申利国,李建喜,林红军,等.POE/PP共混体系的构建及其性能研究[J].中国塑料,2017,31(2):38-42.
18
ZHOU W C, DU Z C, YANG H, et al. Effect of different shear modes on morphology and mechanical properties of polypropylene pipes produced by rotational shear[J]. Chinese Journal of Polymer Science, 2020, 38: 1392-1402.
19
BARSOUM I, ALMANSOORI H, ALMAZROUEI A A, et al. Fracture mechanics testing and crack propagation modelling in polypropylene pipes[J]. International Journal of Structural Integrity, 2021, 12(2): 271-283.
20
祝景云,杜建强,赵和英.POE改性PP的性能研究[J].合成树脂及塑料,2007(1):14-17, 21.
21
DE SOUZA A R, NETTO T A, PASQUALINO I P. Materials selection for sandwich pipes under the combined effect of pressure, bending and temperature[C]//International Conference on Offshore Mechanics and Arctic Engineering, 2007, 4269: 111-122.
22
AL-MAHFOOZ M J, MAHDI E. Bending behavior of glass fiber reinforced composite overwrapping PVC plastic pipes[J]. Composite Structures, 2020, DOI: 10.1016/j.compstruct.2020.112656.
23
CHENG H, PINHEIRO B C, ESTEFEN S F, et al. Ultimate bending strength of sandwich pipes with actual interlayer behavior[J]. Thin-Walled Structures, 2021, DOI: 10.1016/j.tws.2021.107476.
24
OUT J M M. On the prediction of the endurance strength of flexible pipe[C]//Offshore Technology Conference, 1989, DOI: 10.4043/6165-MS.
25
HE X, RYTÖLUOTO I, ANYSZKA R, et al. Silica surface-modification for tailoring the charge trap properties of PP/POE based dielectric nanocomposites for HVDC cable application[J]. IEEE Access, 2020, 8: 87719-87734.
26
王立娟,王华,王焱鹏.POE改性共聚聚丙烯的性能[J].合成树脂及塑料,2020,37(3):15-18.
27
JI H J, WANG Y, ZHU H H, et al. Research on a strengthening method and mechanism of expanding polypropylene pipe[J]. Polymer Engineering & Science, 2021, 61(9): 2233-2242.
28
DOMANESCHI M. Experimental and numerical study of standard impact tests on polypropylene pipes with brittle behaviour[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012, 226(12): 2035-2046.
29
刘鹏,何爽,张振康,等.聚烯烃弹性体的熔体流动速率和含量对聚丙烯树脂改性的影响[J].高分子材料科学与工程,2023,39(10):68-79.
30
JUBSILP C, ASAWAKOSINCHAI A, MORA P, et al. Effects of organic based heat stabilizer on properties of polyvinyl chloride for pipe applications: A comparative study with Pb and CaZn systems[J]. Polymers, 2021, DOI: 10.3390/polym14010133.
31
潘玉彤,王国辉,贺琪,等.改性聚丙烯及其应用研究发展[J].分析化学进展,2022,12(4):334-340.
32
LI X, PI L, NIE M, et al. Joint effects of rotational extrusion and TiO2 on performance and antimicrobial properties of extruded polypropylene copolymer pipes[J]. Journal of Applied Polymer Science, 2015, DOI:10.1002/APP.42410.
33
赖莉琼,杨阳.PP-HDPE复合暖通管材的制备及耐老化性能研究[J].塑料科技,2023,51(6):37-40.
34
WANG Y Z, LI Y, JIA W N, et al. Study on anti-aging performance of composite materials of PP-g-AN/PP/SiO2 [J]. Advanced Materials Research, 2013, 634: 2023-2027.

Comments

PDF(1403 KB)

Accesses

Citation

Detail

Sections
Recommended

/