Preparation and Tribological Properties of PTFE/PEEK Porous Bearing Cage Materials Based on FDM

WANG Wen-wen, LIU Jie, ZHAO Xun-cha, TANG Chao, LIU Peng

PDF(2600 KB)
PDF(2600 KB)
Plastics Science and Technology ›› 2024, Vol. 52 ›› Issue (06) : 16-21. DOI: 10.15925/j.cnki.issn1005-3360.2024.06.004
Theory and Research

Preparation and Tribological Properties of PTFE/PEEK Porous Bearing Cage Materials Based on FDM

Author information +
History +

Abstract

Polytetrafluoroethylene/polyetheretherketone (PTFE/PEEK) binary composite porous materials were prepared by fused deposition molding (FDM) process, and the mapping mechanism between microstructure and macroscopic tribological properties of the materials was researched. The results showed that the PTFE/PEEK porous materials prepared based on FDM process had a positive pore-forming effect and the pores of the porous samples were more dense with the increase of NaCl mass fraction, and the oil content of PTFE/PEEK porous materials was directly proportional to the change of the porosity, and the oil retention rate of the materials was the highest when the mass fraction of NaCl was 53%, and the oil retention rate of all the samples was higher than 90%. Under dry friction conditions, the addition of PTFE improved the tribological properties of the materials to a certain extent. Under the oil-poor lubrication condition, the friction coefficient was lowest for the 6# sample with a NaCl content of 63%, and the combination of the oil supply and oil-containing capacity of the porous structure and the lubricating property of PTFE could give the composites good tribological properties. This study provides a reference for the molding and application of PEEK-based porous bearing cage materials.

Key words

Bearing cage / FDM / PEEK / PTFE / Tribological properties

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations
WANG Wen-wen , LIU Jie , ZHAO Xun-cha , et al . Preparation and Tribological Properties of PTFE/PEEK Porous Bearing Cage Materials Based on FDM. Plastics Science and Technology. 2024, 52(06): 16-21 https://doi.org/10.15925/j.cnki.issn1005-3360.2024.06.004

References

List( Publishing order | Descend order by publishing year | Descend order by cited within ) Chart analysis
1
高亮,贾伟,石峰晖,等.反气相色谱法测定聚醚醚酮的表面性质及在提升热塑性复合材料层间性能中的应用[J].复合材料学报,2023,40(5):2587-2597.
本文引用 [1]
2
陈义,张国新,卞达,等.不同玻璃纤维含量对PTFE增强PEEK复合材料摩擦学性能的影响[J].塑料科技,2023,51(2):11-14.
本文引用 [1]
3
SUN J, YAN K, ZHU Y, et al. A high-similarity modeling method for low-porosity porous material and its application in bearing cage self-lubrication simulation[J]. Materials, 2021, DOI: 10.3390/ma14185449.
本文引用 [1]
4
邓凯文,牛荣军,孙小波,等.石墨烯改性多孔聚酰亚胺轴承保持架材料性能研究[J].材料导报,2022,36(17):222-226.
5
汪怀远,汪桂英,张帅,等.多孔塑料的制备及多孔自润滑新材料的研究进展[J].塑料科技,2011,39(6):88-91.
本文引用 [1]
6
张丽秀,张金钰,魏晓奕,等.含石墨烯润滑油多孔聚酰亚胺摩擦学行为研究[J].润滑与密封,2023,48(9):73-82.
本文引用 [1]
7
王玉荣,蔡美荣,邢喜民,等.含浸凝胶自润滑轴承材料的制备及性能研究[J].摩擦学学报,2022,42(4):792-802.
8
张迪,王超,卿涛,等.空间用多孔聚合物轴承保持架材料研究进展[J].机械工程学报,2018,54(9):17-26.
本文引用 [1]
9
汪怀远,张帅,汪桂英,等.多孔PEEK自润滑材料的制备与摩擦磨损性能[J].高分子材料科学与工程,2012,28(9):137-140.
本文引用 [1]
10
肖治理,杨琳.冷压烧结和冷轧工艺制备原位生成石墨烯增强铜基复合材料[J].热加工工艺,2023,52(20):71-75.
11
SI M M, HAO J Y, ZHAO E D, et al. Preparation of zinc oxide/poly-ether-ether-ketone (PEEK) composites via the cold sintering process[J]. Acta Materialia, 2021, DOI:10.1016/j.actamat.2021.117036.
本文引用 [1]
12
戴志伟,吴亚东,朱伟健,等.制备工艺对多孔Ti6Al4V微观结构和性能的影响[J].航空材料学报,2023,43(6):36-43.
本文引用 [1]
13
马昭,沈伽宁,王凯,等.模压与压延成型对PLA/TPEE共混物结构和性能的影响[J].工程塑料应用,2022,50(5):74-81.
本文引用 [1]
14
张辉,段明德,秦世坤,等.多孔聚醚醚酮保持架材料的FDM制备及其摩擦学性能研究[J].轴承,2023(10):57-62.
本文引用 [3]
15
PAN D, FAN B, QI X, et al. Investigation of PTFE tribological properties using molecular dynamics simulation[J]. Tribology Letters, 2019, 67: 1-10.
本文引用 [1]
16
GHOSH S K, PEREZ G, GOSS J A, et al. Tribological properties of PDA+ PTFE coating in oil-lubricated condition[J]. Applied Surface Science, 2020, DOI: 10.1016/j.apsusc.2020.147627.
本文引用 [1]
17
祁渊,龚俊,杨东亚,等.纳米Al2O3填料增强PEEK-PTFE复合材料基于环-块摩擦结构的摩擦过程研究[J].材料导报,2019,33(10):1756-1761.
本文引用 [1]
18
姚光督,王文东,沈景凤,等.PTFE微粉/CF改性PEEK复合材料的摩擦磨损性能[J].材料科学与工艺,2018,26(3):59-65.
本文引用 [1]
19
张伟.聚醚醚酮三元复合材料熔融沉积增材制造研究[D].长春:吉林大学,2022:14-15.
本文引用 [2]
20
YE S J, ZENG X R. Tribological properties of PTFE and PTFE composites at different temperatures[J]. Tribology Transactions, 2014, 57(3): 382-386.
本文引用 [1]
21
Saisnith V, Fridrici V. A study of the wear damage of a PTFE coating: The effects of temperature and environment on its mechanical and tribological properties[J]. Wear, 2021, DOI: 10.1016/j.wear.2021.203946.
22
ZHANG H, WU Y, LIANG M, et al. Comparative study on the mechanical, tribological, and thermal properties of POM composites filled with different PTFE[J]. Journal of Thermoplastic Composite Materials, 2022, 35(9): 1319-1341.
本文引用 [1]
23
NIKAS G K, SAYLES R S. A study of lubrication mechanisms using two-phase fluids with porous bearing materials[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2008, 222(6): 771-783.
本文引用 [1]
24
ZHANG H, DUAN M, QIN S, et al. Preparation and modification of porous polyetheretherketone (PEEK) cage material based on fused deposition modeling (FDM)[J]. Polymers, 2022, DOI: 10.3390/polym14245403.
本文引用 [1]
25
GAO S, HAN Q, ZHOU N, et al. Stability and skidding behavior of spacecraft porous oil-containing polyimide cages based on high-speed photography technology[J]. Tribology International, 2022, DOI: 10.1016/j.triboint.2021.107294.
本文引用 [1]
26
杨永喜.聚酰亚胺基多孔含油材料的制备及改性研究[D].哈尔滨:哈尔滨工业大学,2017:26-27.
本文引用 [1]
27
YANG C, TIAN X, LI D, et al. Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material[J]. Journal of Materials Processing Technology, 2017, 248: 1-7.
本文引用 [1]
28
周小卉,孙丽丽,蒋先春,等.聚醚醚酮与不同硬质涂层配副的摩擦学行为对比[J].表面技术,2023,52(6):246-255, 360.
29
TOTH L F, SZEBENYI G, SUKUMARAN J, et al. Tribological characterization of nanoparticle filled PTFE: Wear-induced crystallinity increase and filler accumulation[J]. Express Polymer Letters, 2021, 15(10): 972-986.
本文引用 [1]
30
ZHAO Y, GENG Z R, LI D S, et al. An investigation on the tribological properties of graphene and ZDDP as additives in PAO4 oil[J]. Diamond and Related Materials, 2021, DOI: 10.1016/j.diamond.2021.108635.
本文引用 [1]
31
YU B, WANG K, PANG X, et al. Tribological properties of alkylated reduced graphene oxide as lubricant additive[J]. Tribology International, 2022, DOI: 10.1016/j.triboint.2021.107273.
本文引用 [1]

Comments

PDF(2600 KB)

Accesses

Citation

Detail
Sections
Recommended
Copyright © Plastics Science and Technology, All Rights Reserved.
Powered by Beijing Magtech Co. Ltd.

/

〈 〉