Effects of Different Injection Temperatures and Heat Treatments on Friction and Wear Properties of PEEK/CF Composites

SHI Shui-juan, BIAN Da, LI Jia-hong, WANG Kai-xuan, XU Peng-cheng, ZHAO Peng, ZHAO Yong-wu, CHEN Yi

PDF(3180 KB)
PDF(3180 KB)
Plastics Science and Technology ›› 2024, Vol. 52 ›› Issue (04) : 23-27. DOI: 10.15925/j.cnki.issn1005-3360.2024.04.005
Theory and Research

Effects of Different Injection Temperatures and Heat Treatments on Friction and Wear Properties of PEEK/CF Composites

Author information +
History +

Abstract

In order to optimize the molding process of polyetheretherketone(PEEK) and improve the wear resistance of the material and expand the range of applications, carbon fiber (CF) is used as reinforcing phase and PEEK/CF composites under different heat treatment processes were prepared at different injection temperature conditions. Tribologic properties of composites are tested by tribo-wear testing machines, and surface analysis and performance tests are performed using a X-ray diffraction, a white light interferometer, and a scanning electron microscope. The results show that the injection temperature and heat treatment process have no effect on the phase of PEEK/CF composites. With the increase of injection temperature, the friction coefficient and wear of the sample surface show a trend of decreasing first and then increasing, while the friction coefficient and wear rate of the sample after tempering are smaller. When the injection temperature is 175 ℃, the friction coefficient of the tempered material is the lowest, which is 0.091 4, and the wear rate is the lowest, which is 0.106×10-6 mm3/(N·m). The research indicates that appropriate injection temperature and heat treatment can improve the wear reduction and wear resistance of PEEK/CF composites.

Key words

Polyetheretherketone / Carbon fiber / Friction coefficient / Minimum wear rate

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations
SHI Shui-juan , BIAN Da , LI Jia-hong , et al . Effects of Different Injection Temperatures and Heat Treatments on Friction and Wear Properties of PEEK/CF Composites. Plastics Science and Technology. 2024, 52(04): 23-27 https://doi.org/10.15925/j.cnki.issn1005-3360.2024.04.005

References

List( Publishing order | Descend order by publishing year | Descend order by cited within ) Chart analysis
1
逄显娟,岳世伟,黄素玲,等.碳纤维/聚醚醚酮(CF/PEEK)复合材料摩擦磨损性能及抗摩擦静电特性研究[J].中国机械工程,2023,34(3):277-286.
本文引用 [1]
2
MUHSIN S A, HATTON P V, JOHNSON A, et al. Determination of polyetheretherketone (PEEK) mechanical properties as a denture material[J]. Saudi Dental Journal, 2019, 31(3): 382-391.
3
GAN K, LIU H, LIU X, et al. Research progress of polyether ether ketone biocomposites[J]. Annals of Materials Science & Engineering, 2015, 2(1): 15-23.
本文引用 [1]
4
朱艳吉,陈晶,姜丽丽,等.组装改性碳纤维增强聚醚醚酮复合材料的摩擦学性能[J].润滑与密封,2015,40(8):61-65.
本文引用 [1]
5
PAULMIER T, DIRASSEN B, REY R. Electrostatic behaviour of space used materials in regard of internal charging met on spacecrafts[J]. Journal of Electrostatics, 2018, 92: 66-74.
本文引用 [1]
6
ITO K, SHIBATA T, KAWASAKI T. Development of high voltage wire for new structure motor in full hybrid vehicle[J]. SAE International Journal of Alternative Powertrains, 2016, 5(2): 272-277.
本文引用 [1]
7
MA N, LIN G M, XIE G Y, et al. Tribological behavior of polyetheretherketone composites containing short carbon fibers and potassium titanate whiskers in dry sliding against steel[J].Journal of Applied Polymer Science, 2012, 123(2): 740-748.
本文引用 [1]
8
方良超,陈奇海,霍绍新,等.聚醚醚酮(PEEK)的改性及其应用[J].合成材料老化与应用,2019,48(2):115-118.
本文引用 [1]
9
姚光督,王文东,沈景凤,等.PTFE微粉/CF改性PEEK复合材料的摩擦磨损性能[J].材料科学与工艺,2018,26(3):59-65.
10
汪怀远,杨淑慧,张帅,等.聚醚醚酮基复合材料端面摩擦热的有限元数值模拟[J].高分子材料科学与工程,2013,29(3):182-185, 190.
本文引用 [1]
11
刘俊聪,刘爱云,李树虎,等.聚醚醚酮复合材料改性研究进展[J].工程塑料应用,2022,50(2):169-174.
本文引用 [1]
12
GRAVIS D, PONCIN-EPAILLARD F, COULON J F. Correlation between the surface chemistry, the surface free energy and the adhesion of metallic coatings onto plasma-treated poly(ether ether ketone)[J]. Applied Surface Science, 2020, DOI: 10.1016/j.apsusc.2019.144242.
本文引用 [1]
13
冯乐,邱鹏,刘敏,等.壳聚糖改性聚醚醚酮表征及对MC3T3-E1 细胞黏附、增殖的影响[J].中国组织工程研究,2022(21):3351-3356.
本文引用 [1]
14
王楠,张家强,蔺鹏婷,等.聚醚醚酮材料表面磺化改性及表面金属化[J].宇航材料工艺,2021(5):94-98.
本文引用 [1]
15
李卫杰,张伟,李元成,等.激光处理对3D打印聚醚酰亚胺、聚醚醚酮和聚醚醚酮/碳纤维制件胶接性能的影响[J].高分子材料科学与工程,2021(12):75-82.
本文引用 [1]
16
CHENG B X, DUAN H T, CHEN Q, et al. Effect of laser treatment on the tribological performance of polyetheretherketone (PEEK) under seawater lubrication[J]. Applied Surface Science, 2021, DOI: 10.1016/j.apsusc.2021.150668.
本文引用 [1]
17
PANIN S V, LYUKSHIN B A, BOCHKAREVA S A, et al. Material design methodology for optimized wear resistant thermoplastic-matrix composites based on polyetheretherketone and polyphenylene sulfide[J]. Materials, 2020, DOI: 10.3390/ma13030524.
本文引用 [1]
18
LIN L, EMRICH S, KOPNARSKI M, et al. Lubrication performance of a polyetheretherketone (PEEK) and polytetrafluoroethylene (PTFE) blend within a steel/steel tribosystem[J]. Wear, 2021, DOI: 10.1016/j.wear.2021.203997.
本文引用 [1]
19
LIAO Y, CAO L, WANG Q, et al. Enhanced tribological properties of PEEK-based composite coatings reinforced by PTFE and graphite[J]. Journal of Applied Polymer Science, 2021(13): 1-11.
本文引用 [1]
20
PAN L, YUAN X, WANG M, et al. Experimental and numerical simulation study on impact response of TC4/PEEK/Cf laminates under different mass impactors[J]. Composite Structures, 2021(2): 1-14.
21
QIU X T, GAO Y, WANG X L, et al. Cyclic (phenylene sulfide) treated carbon fiber for facile preparation of high performance PEEK based anti-wear composites[J]. Materials Chemistry and Physics, 2022, DOI: 10.1016/j.matchemphys.2021.125665.
22
徐培琦,徐静,宁洋,等.玻纤含量对聚醚醚酮/玻纤复合材料性能的影响[J].塑料科技,2018(6):73-77.
本文引用 [1]
23
LÜ M, LÜ W, CHEN H, et al. Biotribological properties of nano zirconium dioxide and hydroxyapatite-reinforced polyetheretherketone (HA/ZrO2/PEEK) biocomposites[J]. Iranian Polymer Journal, 2021(11): 1127-1136.
本文引用 [1]
24
魏天月.纳米氧化铝增强聚醚醚酮复合材料的制备、性能及生物相容性研究[D].武汉:武汉理工大学,2020.
25
瞿明城,张礼颖,周剑锋,等.碳纳米管改性CF/PEEK复合材料的力学与电磁屏蔽性能[J].复合材料学报,2022(7):3251-3261.
本文引用 [1]
26
SUHAIMIN N S, JAAFAR J, AZIZ M, et al. Nanocomposite membrane by incorporating graphene oxide in sulfonated polyether ether ketone for direct methanol fuel cell[J]. Materials Today: Proceedings, 2021, 46(5): 2084-2091.
本文引用 [1]
27
ARACELI F, SUSANA Q D, PATRICIA E J, et al. Understanding the reinforcement of graphene in poly(ether ether ketone)/ carbon fibre laminates[J]. Polymers, 2021, DOI: 10.3390/polym13152440.
28
SRINIVASARAO Y, MUHAMMAD Z, KUMAR P J, et al. Comprehensive enhancement in thermomechanical performance of melt-extruded PEEK filaments by graphene incorporation[J]. Polymers, 2021, DOI: 10.3390/polym13091425.
本文引用 [1]
29
MA Z, ZHANG G, YANG Q, et al. Tailored morphologies and properties of high-performance microcellular poly (phenylene sulfide)/poly(ether ether ketone)(PPS/PEEK) blends[J]. The Journal of Supercritical Fluids, 2018, 140: 116-128.
本文引用 [1]
30
TENG X, WEN L, LV Y, et al. Effects of potassium titanate whisker and glass fiber on tribological and mechanical properties of PTFE/PEEK blend[J]. High Performance Polymers, 2018, 30(6): 752-764.
本文引用 [1]
31
XIE G, SUI G, YANG R. Effects of potassium titanate whiskers and carbon fiber on the wear behavior of polyetheretherketone composite under water lubricated condition[J]. Composites Science and Technology, 2011, 71(6): 828-835.
本文引用 [1]
32
赵仕浩,张鹏,杨玉婧.模压工艺参数对PEEK基复合材料冲击性能及摩擦学性能的影响[J].橡塑技术与装备,2022,48(7):24-27.
本文引用 [1]
33
岳世伟,逄显娟,牛一旭,等.载荷和速度对聚醚醚酮(PEEK)复合材料摩擦性能的影响[J].材料导报,2022,36(16):255-261.
本文引用 [1]
34
刘煦.碳纤维/PEEK及PTFE/POM复合材料的力学性质研究[D].成都:西南交通大学,2012.
本文引用 [1]
35
王骏,陈义,李迎吉,等.注射温度对碳纤维增强聚醚醚酮的力学及摩擦磨损性能影响探究[J].塑料科技,2022,50(7):49-52.
本文引用 [1]
36
王齐华,吕美,王廷梅.聚合物材料的空间摩擦学[M].北京:科学出版社,2019.
本文引用 [1]

Comments

PDF(3180 KB)

Accesses

Citation

Detail
Sections
Recommended
Copyright © Plastics Science and Technology, All Rights Reserved.
Powered by Beijing Magtech Co. Ltd.

/

〈 〉