Research Progress on Technology, Modification and Application of 3D Printing PETG

SHANG Zu-ming, HU Cheng-nü

PDF(693 KB)
PDF(693 KB)
Plastics Science and Technology ›› 2024, Vol. 52 ›› Issue (03) : 121-126. DOI: 10.15925/j.cnki.issn1005-3360.2024.03.024
Review

Research Progress on Technology, Modification and Application of 3D Printing PETG

Author information +
History +

Abstract

Polyethylene terephthalate-1,4-cyclohexane dimethyl ester (PETG) can be used as a preferred polymer material for 3D printing due to its excellent properties, which has been favored by scholars. In this paper, the printing process of PETG was studied, and it was found that the printing direction, printing thickness, printing temperature, printing speed and filling density, and other process parameters would have a significant impact on the performance of the product. The modification of 3D printed PETG material was studied by blending modification methods such as fiber, polymer, and graphene to improve the fatigue resistance, mechanical and thermal properties of the material. The application research of 3D printing PETG in biomedicine, machining and marine fields as well as the feasibility study of recycling were reviewed in detail. Finally, the development prospect of 3D printing PETG in the future was predicted. It is expected to provide guidance for the industrial application of 3D printed PETG materials.

Key words

3D printing / PETG / Printing process

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations
SHANG Zu-ming , HU Cheng-nü. Research Progress on Technology, Modification and Application of 3D Printing PETG. Plastics Science and Technology. 2024, 52(03): 121-126 https://doi.org/10.15925/j.cnki.issn1005-3360.2024.03.024

References

List( Publishing order | Descend order by publishing year | Descend order by cited within ) Chart analysis
1
HAMIDI A, TADESSE Y. Single step 3D printing of bioinspired structures via metal reinforced thermoplastic and highly stretchable elastomer[J]. Composite Structures, 2019, 210(2): 250-261.
本文引用 [1]
2
MALYADRI T, SUNKARA N, SRINIVASA R M S. Investigation on mechanical properties of 3D printed PETG paterial[J]. Recent Advances in Manufacturing Processes and Systems, 2022, DOI: 10.1007/978-981-16-7787-8_46.
本文引用 [1]
3
刘梦梦,朱晓冬.3D打印成型工艺及材料应用研究进展[J].机械研究与应用,2021,34(4):197-202.
本文引用 [1]
4
SEPAHI M T, ABUSALMA H, JOVANOVIC V, et al. Mechanical properties of 3D-printed parts made of polyethylene terephthalate glycol[J]. Journal of Materials Engineering and Performance, 2021, 30(13): 6851-6861.
5
王玉健,李方正.3D打印材料的研究进展[J].工业技术创新,2023,10(3):55-63.
本文引用 [1]
6
SLIVA A, GUILHON D. Comparative analysis of ankle prosthesis connector adapters in 3D printed using PLA and PETG[J]. XXVI Brazilian Congress on Biomedical Engineering, 2019, DOI: 10.1007/978-981-13-2119-1_24.
本文引用 [1]
7
HOLCOMB G, CALDONA E B, CHENG X, et al. On the optimized 3D printing and post-processing of PETG materials[J]. MRS Communications, 2022, 12(7): 381-387.
本文引用 [1]
8
ALEXOPOULOU V E, CHRISTODOULOU I T, MARKOPOULOS A P.　 Effect of printing speed and layer height on geometrical accuracy of FDM-printed resolution holes of PETG artifacts[J]. Engineering Proceedings, 2022, DOI: 10.3390/IECMA2022-12887.
本文引用 [1]
9
PRABHAKARAN R, BRITTO J J J, VENKATESH R, et al. Experimental investigation and identifying the suitable process parameters for additively manufactured PETG material by fused deposition modeling[J]. Recent Advances in Materials Technologies, 2022, DOI: 10.1007/978-981-19-3895-5_44.
10
TERAIYA S, VYAVAHARE S, KUMAR S. Experimental investigation on influence of process parameters on mechanical properties of PETG parts made by fused deposition modelling[J]. Advances in Manufacturing Processes, 2020, DOI: 10.1007/978-981-15-9117-4_21.
11
ÖZEN A, ABALI B E, VÖLLMECKE C, et al. Exploring the role of manufacturing parameters on microstructure and mechanical properties in fused deposition modeling (FDM) using PETG[J]. Applied Composite Materials, 2021, 28(15): 1799-1828.
12
LOKESH N, SUDHEER REDDY J, PRAVEEN B A, et al. Evaluation and optimization of process parameter for surface roughness of 3D-printed PETG specimens using taguchi method at vonstant printing temperature[J]. Recent Advances in Mechanical Engineering, 2023, DOI: 10.1007/978-981-16-9057-0_22.
本文引用 [1]
13
ROMEIJN T, BEHRENS M, PAUL G, et al. Instantaneous and long-term mechanical properties of polyethylene terephthalate glycol(PETG) additively manufactured by pellet-based material extrusion[J]. Additive Manufacturing, 2022, DOI: 10.1016/j.addma.2022.103145.
本文引用 [1]
14
ALARIFI I M. PETG/carbon fiber composites with different structures produced by 3D printing[J]. Polymer Testing, 2023, DOI: 10.1016/j.polymertesting.2023.107949.
本文引用 [1]
15
SUNDER S S, SAHITHI V V D. Process parameter optimization of FDM 3D printer using PETG and carbon fiber PETG[J]. Materials Science Forum, 2023(3): 49-57.
本文引用 [1]
16
VAUGHT L O, POLYCARPOU A A. Investigating the effect of fused deposition modelling on the tribology of PETG thermoplastic[J]. Wear, 2023, DOI: 10.1016/j.wear.2023.204736.
17
DE MORAES MELO NETO C L, BERNARDI B S, DE CARVALHO DEKON S F, et al. Influence of thermal cycles and disinfection on the roughness, microhardness and color of PETG/TPU and PMMA[J]. Polymers in Medicine, 2023, 53(1): 19-24.
18
KICHLOO A F, RAINA A, HAQ M I U, et al. Impact of carbon fiber reinforcement on mechanical and tribological behavior of 3D-printed polyethylene terephthalate glycol polymer composites—An experimental investigation[J]. Journal of Materials Engineering and Performance, 2021, DOI: 10.1007/s11665-021-06262-6.
本文引用 [1]
19
韩学斌,张紫慧,石鸿瑞,等.3DP技术下智能化膝盖助力设备可行性分析[J].智能城市,2021,7(5):13-14.
本文引用 [1]
20
MUSHTAQ R T, Iqbal A, Wang Y N, et al. Parametric optimization of 3D printing process hybridized with laser-polished PETG polymer[J]. Polymer Testing, 2023, DOI: 10.1016/j.polymertesting.2023.108129.
本文引用 [1]
21
RAMÍREZ-REVILLA S, CAMACHO-VALENCIA D, GONZALES-CONDORI E G, et al. Evaluation and comparison of the degradability and compressive and tensile properties of 3D printing polymeric materials: PLA, PETG, PC, and ASA[J]. MRS Communications, 2023, 13(1): 55-62.
本文引用 [2]
22
汪杨.基于熔融沉积成型3D打印工艺的混合增材制造技术基础研究[D].南京:东南大学,2020.
本文引用 [1]
23
KUMARESAN R, SAMYKANO M, KADIRGAMA K, et al. Effects of printing parameters on the mechanical characteristics and mathematical modeling of FDM-printed PETG[J]. The International Journal of Advanced Manufacturing Technology, 2023, 128(7/8): 3471-3489.
本文引用 [1]
24
CLARKE T, HOSSEINI A. Effects of print parameters on tensile characteristics of additively manufactured polyethylene terephthalate-glycol(PETG)[J]. The International Journal of Advanced Manufacturing Technology, 2023, 125(11/12): 4953-4974.
本文引用 [1]
25
KADHUM A H, AL-ZUBAIDI S, ABDULKAREEM S S. Effect of the infill patterns on the mechanical and surface characteristics of 3D printing of PLA, PLA+ and PETG materials[J]. Chem Engineering, 2023, DOI: 10.3390/chemengineering7030046.
本文引用 [1]
26
LOSKOT J, JEZBERA D, LOSKOT R, et al. Influence of print speed on the microstructure, morphology, and mechanical properties of 3D-printed PETG products[J]. Polymer Testing, 2023, DOI: 10.1016/j.polymertesting.2023.108055.
本文引用 [1]
27
ERGENE B, BOLAT Ç. An experimental study on the role of manufacturing parameters on the dry sliding wear performance of additively manufactured PETG[J]. International Polymer Processing, 2022, 37(3): 255-270.
本文引用 [1]
28
GARCÍA E, NÚÑEZ P J, CAMINERO M A, et al. Effects of carbon fibre reinforcement on the geometric properties of PETG-based filament using FFF additive manufacturing[J]. Composites Part B: Engineering, 2022, DOI: 10.1016/j.compositesb.2022.109766.
本文引用 [1]
29
VALVEZ S, SILVA A P, REIS P N B. Optimization of printing parameters to maximize the mechanical properties of 3D-printed PETG-based parts[J]. Polymers, 2022, DOI: 10.3390/polym14132564.
本文引用 [1]
30
CHEN Z X, GONG K, HUANG C, et al. Parameter optimization for PETG/ABS bilayer tensile specimens in material extrusion 3D printing through orthogonal method[J]. The International Journal of Advanced Manufacturing Technology, 2023, 127(1/2): 447-458.
本文引用 [1]
31
赵高升,刘秀军,张志明,等.PETG/PBT耗材的制备及其3D打印工艺研究[J].塑料工业,2017,45(12):59-62.
本文引用 [1]
32
RAJESHIRKE M, ALKUNTE S, HUSEYNOV O, et al. Fatigue analysis of additively manufactured short carbon fiber-reinforced PETG components[J]. The International Journal of Advanced Manufacturing Technology, 2023, 128(5/6): 2377-2394.
本文引用 [1]
33
MISHRA P K, KUMAR D S, JAGADESH T, et al. Experimental investigation into flexural and impact behavior of 3D printed PETG short carbon fibre composite under solar light irradiation[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2023, 237(16): 3597-3607.
本文引用 [1]
34
VALVEZ S, SILVA A P, REIS P N B. Compressive behavior of 3D-printed PETG composites[J]. Aerospace, 2022, DOI: 10.3390/aerospace9030124.
本文引用 [1]
35
乔雯钰,王晨蕾,胡浩.FDM用PETG系列耗材的改性研究[J].中国塑料,2020,34(10):24-31.
本文引用 [1]
36
郝亚暾,张倩,孙奉瑞.3D打印参数对PETG基TPU制品力学性能的影响[J].特种橡胶制品,2020,41(2):44-46.
本文引用 [1]
37
索帅鹏.基于FDM的多色多材料3D打印机开发与应用研究[D].济南:齐鲁工业大学 2023.
本文引用 [1]
38
BEDI S S, MALLESHA V, MAHESH V, et al. Thermal characterization of 3D printable multifunctional graphene‐reinforced polyethylene terephthalate glycol(PETG) composite filaments enabled for smart structural applications[J]. Polymer Engineering & Science, 2023, 63(9): 2841-2856.
本文引用 [1]
39
KUMAR J, NEGI S. Development of 3D printable cenosphere-reinforced polyethylene terephthalate glycol(PETG) filaments for lightweight structural applications[J]. Polymer Composites, 2023, 44(10): 7030-7039.
本文引用 [1]
40
CAFINO R, SOLIVEN M M T, VELASCO L C, et al. Evaluation of polyethylene terephthalate glycol(PETG), Simubone™, and photopolymer resin as 3D printed temporal bone models for surgical simulation[J]. Asian Journal of Surgery, 2023, DOI: 10.1016/j.asjsur.2023.08.095.
本文引用 [1]
41
VIJAYASANKAR K N, DILEEP B, DODDAMANI M, et al. Additive manufacturing of short silk fiber reinforced PETG composites[J]. Materials Today Communications, 2022, DOI: 10.1016/j.mtcomm.2022.104772.
本文引用 [1]
42
SHILOV S Y, ROZHKOVA Y A, MARKOVA L N, et al. Biocompatibility of 3D-printed PLA, PEEK and PETG: Adhesion of bone marrow and peritoneal lavage cells[J]. Polymers, 2022, DOI: 10.3390/polym14193958.
本文引用 [1]
43
SOLEYMAN E, ABEROUMAND M, RAHMATABADI D, et al. Assessment of controllable shape transformation, potential applications, and tensile shape memory properties of 3D printed PETG[J]. Journal of Materials Research and Technology, 2022, 18(24): 4201-4215.
本文引用 [1]
44
许昆鹏.PETG-酪蛋白胶3D打印形状记忆塑料的制备研究[J].塑料科技,2019,47(10):44-79.
本文引用 [1]
45
SIDDIKALI P, SREEKANTH P S R. Performance evaluation of CNT reinforcement on electroless plating on solid free-form-fabricated PETG specimens for prosthetic limb application[J]. Polymers, 2022, DOI: 10.3390/polym14163366.
本文引用 [1]
46
张凯,姚广,王鸿沣.我国塑料回收产业对温室气体减排的影响[J].塑料科技,2020,48(7):126-128.
本文引用 [1]
47
FERNÁNDEZ P, MARQUÉS R, BELTRÁN N, et al. Using PETG/rPET blends in fused particle fabrication: Analysis of feasibility and mechanical behaviour[J]. Advances in Science and Technology, 2023, DOI: 10.4028/p-5M4UqT.
本文引用 [1]
48
BREMER M, JANOSCHEK L, KASCHTA D, et al. Influence of plastic recycling-A feasibility study for additive manufacturing using glycol modified polyethylene terephthalate(PETG)[J]. SN Applied Sciences, 2022, DOI: 10.1007/s42452-022-05039-3.
本文引用 [1]
49
IGWE A C, ONIKO K D. Investigation for an alternative material for the development of a clubfoot brace to improve sustainability[J]. Journal of Materials Engineering and Performance, 2023, DOI: 10.1007/s11665-023-08012-2.
本文引用 [1]
50
BEX G J P, INGENHUT B L J, CATE T T, et al. Sustainable approach to produce 3D-printed continuous carbon fiber composites: "A comparison of virgin and recycled PETG"[J]. Polymer Composites, 2021, DOI: 10.1002/pc.26143.
本文引用 [1]

Comments

PDF(693 KB)

Accesses

Citation

Detail
Sections
Recommended
Copyright © Plastics Science and Technology, All Rights Reserved.
Powered by Beijing Magtech Co. Ltd.

/

〈 〉